The Luma Blend is the highest-performing Hybrid CCT tape in the Inphase catalog, and the CRI number alone sets it apart from anything else in its class. At CRI 95, it meets the most demanding color rendering standards in the industry, which is exactly why it belongs on film and television productions where the integrity of white light under camera scrutiny is non-negotiable. Most hybrid CCT tape on the market tops out between 90 and 93. This one goes further.
The tape runs two dedicated 2835 chip channels: a 2700K warm white and a 6500K cool white, tunable continuously between both endpoints through a single DMX-controlled tape run. Luminous flux hits 578.5 lm at the warm end and 707.4 lm at the full cool white end, giving project managers and lighting teams real output numbers to plan against when budgeting tape runs and power requirements for a build.
At 120 LEDs per meter on a 3oz copper PCB, thermal management and voltage regulation across the full 5-meter roll are handled properly, not as an afterthought. The heavier copper weight matters on long continuous runs where cheaper PCBs start to show voltage drop and inconsistent output toward the far end of the roll. Running at 24V DC constant voltage with full DMX compatibility, it drops cleanly into any professional control system without additional configuration.
For fabrication shops and scenic teams building sets that will be lit, filmed, and expected to look exactly the same on day one and day sixty, the Luma Blend is the tape to spec.
Specifications
- Series: Luma
- Model: Blend
- LED Chip: 2835
- Color Range: 2700K to 6500K Hybrid CCT
- CRI: 95
- Luminous Flux: 707.4 lm at 6500K / 578.5 lm at 2700K
- LED Count: 120 per meter / 600 per roll
- Tape Width: 10mm
- Roll Length: 5M / 16.4′
- Voltage: 24V DC
- Max Power: 15W per meter
- PCB Copper Weight: 3oz
- DMX Compatible: Yes
- Architecture: Constant Voltage
- Lifespan: 50,000 hours at full brightness
